Nearly there, but not quite…

I did write:

Very easy to configure, I plugged it into the power then plugged the supplied ethernet cable into my iMac, reconfigured the ethernet settings in System Preferences, turned off the Airport on the iMac. Then went to a browser, typed in the 1.1.1.1 address, entered the username and password. Added my Airport network details. Very pleased to see that my 802.11n 5GHz network was recognised, remembered to use WPA2-AES (as that is what the Airport Extreme uses). Click configure,update. Job done!

However life is never that simple…

Once I placed the Buffalo Nfiniti Wireless-N Dual Band Ethernet Converter under my TV, it didn’t seem to work. I in the main purchased the Buffalo device so that I could connect my new LG BD370 Blu-ray Player to the internet. The LG Blu-Ray Player can also play YouTube videos, but has to be connected to the internet to do so.

The LG Blu-Ray Player intially could not connect to the network, which indicated to me that the problem was with the Ethernet Converter. In the end I did a full reset and reconfigured. Checking the web based advanced menu, I worked out that it had retained the default 1.1.1.1 IP address.

In that menu I changed the Unit IP Address from Manual Setup to dynamic and to acquire an IP Address automatically.

At this point the LG Blu-Ray Player could now connect to the network and the internet, but still wouldn’t play YouTube videos. Of course now I was connected to the internet I could download updated firmware for the LG Blu-Ray Player. Once downloaded and installed the LG Blu-Ray Player could now play YouTube videos.

Buffalo Nfiniti Wireless-N Dual Band Ethernet Converter, Done!

Well that was simple.

I ordered the Buffalo Nfiniti Wireless-N Dual Band Ethernet Converter from Amazon on the 1st January. I used the Super Saver Delivery option, I was in no hurry and why pay extra for postage (especially over New Year). Really surprised to see the parcel arrive this morning! Excellent service Amazon, well impressed.

It’s smaller than the picture makes it look.

Very easy to configure, I plugged it into the power then plugged the supplied ethernet cable into my iMac, reconfigured the ethernet settings in System Preferences, turned off the Airport on the iMac. Then went to a browser, typed in the 1.1.1.1 address, entered the username and password. Added my Airport network details. Very pleased to see that my 802.11n 5GHz network was recognised, remembered to use WPA2-AES (as that is what the Airport Extreme uses). Click configure,update. Job done!

The reason the Buffalo device appeals, is that it comes with four ethernet ports, which means I can connect four devices to the network.

Now to test it out under the TV!

Buffalo Nfiniti Wireless-N Dual Band Ethernet Converter

I was always a fan of the Linksys WET54G. It allows you to connect a wired client to a wireless network, acting as an ethernet bridge. For some time I have been thinking about getting an 802.11n version of the device.However whenever I looked it appeared that Linksys weren’t making one. Obviously I haven’t been looking enough as there are now quite a few 802.11n ethernet bridges now on the market. As well as the Linksys, there is a D-Link and I noticed that Buffalo make the Buffalo Nfiniti Wireless-N Dual Band Ethernet Converter. This looked like an ideal solution for under the TV. I have been using an ethernet cable however the “Little People” kept pulling the cable out so I have been thinking about a wireless solution. I didn’t want 802.11g as that (from experience) with the WET54G it was too slow for video.

The reason the Buffalo device appeals, is that it comes with four ethernet ports, which means I can connect four devices to the network.

I have ordered the Buffalo device and it should arrive next week.